Zinsser® BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

Zinsser® BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

Item # RST320991CT

  • The original shellac primer/sealer—trusted for decades.
  • High-hiding formula covers even the most stubborn and persistent stains.
  • Seals porous surfaces with excellent enamel holdout.
  • Permanently blocks most every kind of odor.
  • Excellent adhesion to all, even glossy, surfaces—no scuff sanding required.
  • Dried film is non-toxic and hypo-allergenic.
  • Can be applied in freezing temperatures.
Manufacturers Item #320991CT

Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).

Paint Sub-Category: Primer; Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

  • Global Product Type Building/Construction Paints & Primers
  • Paint Sub-Category Primer, Shellac-Based
  • Intended Application Environment Interior/Exterior
  • Finish/Sheen Flat
  • Color(s) White
  • Color Family White
  • Volume Capacity 1 gal
  • Packaging Type Bucket/Pail
  • Binder/Vehicle Ingredient(s) Shellac
  • Diluent/Solvent Ingredient(s) Denatured Alcohol; Water
  • Application Method Brush; Roller
  • Recommended Level of Ventilation Moderate
  • Application Temperature Range 0º and 90ºF
  • Applicable Surface Material Cement; Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood
  • Maximum Coverage Area 500 sq ft
  • Cure/Dry-Time Range 20 min (Touch); 45 min (Handle, Re-Coat); 1-3 Days (Full Cure)
  • Age Recommendation Ages 16 and Up
  • Product Biodegradability Indicator N
  • Product Biodegradability in Days 0
  • Product Compostability Indicator N
  • Pre-Consumer Recycled Content Percent 0%
  • Post-Consumer Recycled Content Percent 0%
  • Total Recycled Content Percent 0%
  • Disclaimer Statement B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
  • Footnote 1 Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
  • Footnote 2 Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
  • Country of Origin US
  • Carton Pack Quantity 2
  • Pack Quantity 0
  • UPC 047719009016
  • UNSPSC 31211509